Ali Bahadori Jahromi unveiled nine knowledge-based products at the country’s thirteenth technological event, INOTEX 2024.

According to the INOTEX 2024 newsroom, some of these products include:

One method of measuring fluid height is the immersion method. This method, unlike the float model, is complex but its low sensitivity to fluid properties and non-reactivity to fluid vapors has made it one of the most widely used methods in the oil, gas, and petrochemical industries. Now, the immersion sensor made by Shahrah Mechatronics Pars, considering the above, has a suitable market and application.

The knowledge-based company Rasmco has localized the first smart pigging ball in Iran. This company has received the necessary approvals from the Ministry of Oil and has also obtained a mass production license.

Regarding the smart pig product for inspecting oil and gas pipelines: The smart pig scans the pipe wall by passing through the pipe without the need to cut off the flow. The data collected by the sensors is analyzed by proprietary software, and pipe defects are identified. The final report is presented to the employer to prevent explosions and leaks.

Sharif’s innovative security thinkers are active in the field of information technology and communications and computer software and have been confirmed as knowledge-based since 2017. The company’s products are designed to provide safe and fast solutions with concurrent hardware and software design and have a very high level of technology, so much so that they have been confirmed as level 1. This company has created a product called the 1Gbps third-generation secure hardware communication tunnel. Using Virtual private network technology for secure communication to connect two private networks or a private network with a user through an insecure internet network, guaranteed through encryption and electronic signature, the design of the secure hardware communication tunnel product in the form of Bare-Metal and without an operating system and on the FPGA platform, allows the connection of two networks (Site to Site (VPN up to Gbps and the connection of one network with one user up to 12Mbps are the specifications of this product.

Tomorrow’s Knowledge-Thinking Kousha Company is one of the active companies in Hormozgan province in the field of electronics, which has been knowledge-based as a startup in 1402 and focuses on research and development of products related to the control and monitoring of electromotors. This company has been able to provide equipment for the control, monitoring, and advanced protection of Low Voltage electromotors. This product is designed to protect and control low-pressure motors against current errors and thermal stresses in such a way that it samples the motor currents and eliminates high-frequency noises, performs harmonic signal analysis, and extracts the main component as well as calculates the effective current values, identifies and stores error events online.

Nema Motor Pishran is one of the active companies in the field of electricity and electronics, which has been knowledge-based in 1400 and is currently a startup. This company focuses on research and development of products related to electromotors and has said about the electric boat motor product unveiled at INOTEX 2024: The electric boat motor is used to move various types of marine vessels. The consumed energy is supplied by a battery with a voltage of 48 volts. The electric motor is of the permanent magnet synchronous PMSM type and produces a power of 7 kilowatts. In the structure of the electromotor, segment stator technology and a water cooling network in the aluminum shell are used. The 50 Newton-meter torque of the electromotor reaches the propeller through the shaft and the conical gearbox system and causes the vessel to move.

Shahrah Mechatronics Pars is another company that has unveiled its product. It is one of the startup knowledge-based companies active in the field of electricity and electronics and is specifically focused on the development of products related to oil and gas due to its activity in Bushehr province. The product of the fluid level measurement sensor using the immersion method with the use of a torque tube is actually one of the methods of measuring fluid height using the immersion method. This method, unlike the float model, is complex but its low sensitivity to fluid properties and non-reactivity to fluid vapors has made it one of the most widely used methods in the oil, gas, and petrochemical industries. The immersion sensor made by Shahrah Mechatronics Pars, considering the above, has a suitable market and application.

Razi Metal Processing Development Company is one of the active companies in the field of chemistry that has worked on both nickel and cobalt ores and has reached a purity of over 99 percent and has been knowledge-based as a startup at the end of 1402. Nickel and cobalt are the products of this company, and both are valuable and widely used elements that reaching high purity of these elements was not easily possible and requires very complex processes at different stages. For example, in the process of nickel production, pyrometallurgical technologies, solvent extraction (SX), and a specific type of electrochemical method are used simultaneously, so the technology level of these elements with a purity of over 99 percent is very high and is considered level 1 knowledge-based products.

Ghadir Technology Development Knowledge-Based Company started its activities in 97 and consists of 6 departments of design and analysis, construction and production, materials, artificial intelligence software, and commerce. The main focus of the company is on the design and production of industrial mechanisms such as rotary machines and analytical software. RoViLab software, a virtual laboratory for the design and analysis of various rotary machines from the perspective of rotor dynamics, allows the design and display of a rotary machine and viewing the desired results in the shortest possible time and in an integrated work environment by the software’s graphical interface. The use of advanced solvers and modern analytical and numerical solution methods, the ability to study parametrically, and also the possibility of examining the effect of manufacturing defects and their sensitivity analysis are the specifications of this product.

Promica is a coating used to protect surfaces against corrosion and beautify structures and is considered one of the best building material technologies. Promica is made of mica mineral, granite powder, water-based resins, UV-resistant additives, and mineral pigments. This product has been registered as an invention with number 59297 dated 88/03/11 in the General Directorate of Companies Registration and Industrial Property. Generally, the liners used in Asia are divided into metal, rubber, and a combination of rubber and metal. Novin Astar Sharif Karamania is the first specialized company in the field of design, modeling, simulation, optimization, construction, and monitoring of composite liners in the country.

Finally, it should be mentioned the swellable packers that can be installed and removed, which are one of the most important types of packers used in processes related to the repair, maintenance, and stimulation of oil and gas wells. These tools make it possible to perform operations such as well stimulation, acidizing, wellhead repairs, and many other operations without removing the production string. These types of packers are passed through the core pipe and after reaching the desired depth, they swell and perform the sealing operation of the casing pipe of oil and gas wells.